Studio Quality Litz Microphone Cable - 10m

LITZ
Just
 IN STOCK
studio.proj-litzcable
Larger picture
The Litz microphone cable is a high quality copper cable ideally suited to high frequency, low loss applications such as those found in music recording and project studios. 

JoeMeek JM27-SM Shock Mount for JM27 Microphones

JM27-SM
 IN STOCK
joemeek_jm27sm
Larger picture

Joe Meek JM27-SM Shock Mount for the JoeMeek JM27 microphone. 

JoeMeek JM27-SMHD Metal Shock Mount for JM27 Microphones

JM27-SMHD
 IN STOCK
jm27SMHD
Larger picture
JoeMeek JM27-SMHD Metal Shock Mount for JM27 Microphones

JoeMeek JM47-SM Shock Mount for JM37 / JM47 Microphones

JM47-SM
 IN STOCK
joemeek_jm47sm
Larger picture
JoeMeek JM47-SM Shock Mount for JM37 / JM47 Microphone

Studio Projects SP-MPF Professional Pop Filter

SP-MPF
Just
spmpf
Larger picture
The Studio Projects SP-MPF is a professional pop filter, suitable for all vocal applications. Because of the materials utilized, it is significantly more effective than fabric filters. Use of the SP-MPF will allow higher recording levels to be achieved, with less risk of the clipping associated with "plosives" and large bursts of air. The SP-MPF directional capability allows for different sonic detail depending on which side of the filter faces the artist. The front side (logo facing the artist) offers better midrange clarity and less low frequency detail. Turn it around, you get less midrange and more lows! The included adjustable goose-neck and metal clamp allow for easy positioning and because the SP-MPF is metal, it can be sanitized between sessions

JoeMeek JM27 Condenser Microphone

JM27
Just
 IN STOCK
jm27
Larger picture

The JoeMek JM27 is a small diaphragm condenser microphone with a fixed Cardioid pattern. Building on the tradition of classic studio microphones, we combined an FET pre-amplifier with transformer-balanced output resulting in a low noise, high SPL mic - perfect for a variety of studio applications.

The capsule is manufactured in the classic "concentric electrode" design, providing smooth extended frequency response. We further enhanced the audio quality by using dynamic feedback at the capacitor element. This technique eliminates distortions, which can occur at high SPL.

The diaphragm is made from micro-fine Mylar and is gold sputtered. The microphone body is machined from brass, with audio connection via a balanced 3-pin XLR connector. Power is supplied via Phantom Power from either your console or microphone preamplifier.

You'll find the JM27 performs especially well when used for acoustic and orchestral instruments as well as in pairs for drum overheads and other stereo applications.


JM27 Specifications

Dimensions:
137X22mm
Frequency response:
30Hz-20KHz
Sensitivity:
10mV/Pa-40+/-2dB
(0dB= 1 V/Pa 1000Hz)
Polar pattern:
Cardioid Diversity> 12dB (300-3000Hz)
b Diversity> 15dB(1000Hz)
Impedance:
200 ohms
Equivalent noise level:
18dB (A Weighted)
Maximum SPL for 0.5% THD@1000Hz:
130db
Weight:
135g

JoeMeek JM27 Pac - Pair of Condenser Microphones

JM27Pac
Just
 IN STOCK
jm27pac_package
Larger picture

Sooner or later, every engineer finds the need to record in stereo. Our new JM27 Pac fits the bill perfectly!

Consisting of a factory-matched pair of JM27 Small Diaphragm Condenser Microphones, the Pac also includes two of our new heavy-duty all metal suspensions, foam windscreens (for outdoor use), and a Stereo "T" Bar (necessary for X/Y recording applications).

All of this comes neatly packed into an impact resistant, foam lined ABS case, making it easy to transport your microphones while protecting them from the elements.

You'll find the JM27 Pac perfect for use as drum overheads, as well as for recording acoustic and orchestral instruments. Every mic locker needs a stereo pair. Here's yours!


Applications

• Percussion overheads
• Strings
• Instrument Miking
• Acoustic instruments
• Piano, Choir
• Stereo M/S and X/Y applications


JM27 Specifications

Dimensions:
137X22mm
Frequency response:
30Hz-20KHz
Sensitivity:
10mV/Pa-40+/-2dB
(0dB= 1 V/Pa 1000Hz)
Polar pattern:
Cardioid Diversity> 12dB (300-3000Hz)
b Diversity> 15dB(1000Hz)
Impedance:
200 ohms
Equivalent noise level:
18dB (A Weighted)
Maximum SPL for 0.5% THD@1000Hz:
130db
Weight:
135g

JoeMeek JM-27/threeQ Mono Compressor Pro-Pak - SPECIAL DEAL

JM27 Pro-Pak
 30% OFF - IN STOCK

The JoeMeek JM27 Pro-Pak features the JM27G small diaphragm condenser microphone with a fixed Cardioid pattern, threeQ Mono Compressor / mic. pre-amp., JM27-SM Shock Mount, SP-MPF Metal Pop Shield and SP-203X 3-pin high quality Litz microphone cable. Building on the tradition of classic studio microphones, we combined an FET pre-amplifier with transformer-balanced output resulting in a low noise, high SPL mic - perfect for a variety of studio applications. With a combined retail price of close to £320 the JoeMeek JM-27 Pro-Pak is a clear winner.

You'll find the JM27 performs especially well when used for acoustic and orchestral instruments as well as in pairs for drum overheads and other stereo applications. Combine this with the beautifully designed threeQ mono compressor and It will bring out the best qualities or your music by giving it the "gloss" of a professional recording studio, at a fraction of the cost! With inputs to accept everything between microphone and instrument levels, the threeQ sounds much larger than it's size!

To top off this exceptional package we are also including the JM27-SM Shock Mount, SP-MPF Metal Pop Shield and SP-203X 3-pin high quality Litz microphone cable.

Offer available while stocks last!

 
   

 

JoeMeek JM37s Condenser Microphone

JM37s
Just
 IN STOCK
jm37s
Larger picture

The JM37 is a high quality, large diaphragm condenser microphone with a fixed Cardioid pattern. WE chose FET devices for both preamplifier and output stages, resulting in a mic that exhibits very pleasing audio qualities.

The capsule is manufactured in the classic "concentric electrode" design, providing smooth extended frequency response. We further enhanced the audio quality by using dynamic feedback at the capacitor element. This technique eliminates distortions, which can occur at high SPL.

The large 1.035" diaphragm is made from micro-fine Mylar and is gold sputtered. The microphone body is machined from brass, with audio connection via a balanced 3-pin XLR connector. Power is supplied via Phantom Power from either your console or microphone preamplifier.

You'll find that the JM37 is an excellent choice for male and female vocals, as well as acoustic guitar and other instruments.

JM37 Specifications

Dimensions:
137X22mm
Frequency response:
substantially flat 25Hz to 20KHz
Sensitivity:
16mV/PA-40+/-2dB (0dB= 1V/Pa 1000Hz)
Recommended load impedance:
200 ohm
Signal to noise ratio:
74dB
Dynamic range:
126dB
 

JoeMeek JM37DP Condenser Microphone

JM37P
Just
 IN STOCK
jm37dp
Larger picture

The JM37-DP is a high quality, large diaphragm condenser microphone with Cardioid and Omni patterns. By utilizing FET devices for both preamplifier and output stages, we created a microphone that's destined to be your "go-to" mic for a variety of recording purposes.

We used classic "center-electrode" design for the capsule, which provides very smooth extended frequency response. Then we used dynamic feedback at the capacitor element, which further enhanced the audio quality by eliminating distortions that may occur at high SPL.

The large 1.035" dual diaphragms are manufactured from micro-fine Mylar with gold sputtering. The body is machined from solid brass, with connection to the outside world via a 3 Pin XLR connector. Power is supplied via Phantom Power from either your console or microphone preamplifier.

An excellent choice for male and female lead vocals, the JM37-DP also excels at recording choir, orchestral and other acoustic instruments.


JM37DP Specifications

Noise Level :
19dB (A weighted)
Frequency response:
substantially flat 25Hz to 20KHz
Sensitivity:
16mV/PA-40+/-2dB (0dB= 1V/Pa 1000Hz)
Recommended load impedance:
200 ohm
Max SPL:
128dB
Power Requirement :
48V

 

JoeMeek JM-37DP/oneQ Studio Channel Pro-Pak - SPECIAL DEAL

JM37DP Pro-Pak
 30% OFF - IN STOCK

The JoeMeek JM37DP Pro-Pak features the JM37DP large large diaphragm condenser microphone with Cardioid and Omni patterns. By utilizing FET devices for both preamplifier and output stages, we created a microphone that's destined to be your "go-to" mic for a variety of recording purposes. The large 1.035" dual diaphragms are manufactured from micro-fine Mylar with gold sputtering. The body is machined from solid brass, with connection to the outside world via a 3 Pin XLR connector. With a combined retail price of close to £717 the JoeMeek JM37DP Pro-Pak is a clear winner.

An excellent choice for male and female lead vocals, the JM37-DP also excels at recording choir, orchestral and other acoustic instruments. Combine this with the beautifully designed oneQ - a single channel combining Mic Pre (with Burr-Brown IC), four band EQ, the most flexible of any Joemeek ever, our "signature" optical compressor, De-Esser, and Enhancer, it's a master channel like no other.

To top off this exceptional package we are also including the JM47-SM Shock Mount, SP-MPF Metal Pop Shield and SP-203X 3-pin high quality Litz microphone cable.

Offer available while stocks last!

 
   

 

JoeMeek JM47a Condenser Microphone

JM47a
 IN STOCK
jm47a
Larger picture

The JM47a is a high quality large diaphragm condenser microphone with Cardioid pattern. By using an FET device for the preamplifier circuit combined with a transformer-balanced output, we built a microphone that's destined to be an instant classic.

The capsule is made using a classic "center-electrode" design with dynamic feedback at the capacitor element. This insures that the JM47a will not exhibit low frequency "boominess" or distort as readily at high SPL. The diaphragm is manufactured from micro-fine Mylar, which is in turn gold sputtered. The body is machined from high-grade brass, with audio connection via a 3 pin XLR connector at the base. High Pass Filter and Pad switches increase the flexibility of this versatile microphone.

The JM47a is especially good for male and female vocals, and also excels for recording guitars and other acoustic instruments.


JM47 Specifications

Dimensions:
137X22mm
Frequency response:
substantially flat 20Hz to 20KHz
Sensitivity:
approx. -36dBV
Recommended load impedance:
2Kohm
Signal to noise ratio:
74dB
Dynamic range:
126dB

JoeMeek JM472 Combo

JM472 Combo
Just
 IN STOCK
jm472
Larger picture

The JM472 Combo offers recording enthusiasts an economical way to purchase both large and small diaphragm condenser microphones, insuring that they'll be prepared for almost any type of recording.

Included in the Combo are one JM47 Large Diaphragm Condenser Microphone, one JM27 Small Diaphragm Condenser Mic, along with stand mounts and foam windscreens (recommended for outdoor use). It all comes neatly packaged in an impact resistant, foam lined ABS case for easy transport and protection from the elements.


Applications

• Percussion overheads
• Strings
• Instrument Miking
• Acoustic instruments
• Piano
• Vocals, Choir


JM47 Specifications

Dimensions:
137X22mm
Frequency response:
substantially flat 20Hz to 20KHz
Sensitivity:
approx. -36dBV
Recommended load impedance:
2Kohm
Signal to noise ratio:
74dB
Dynamic range:
126dB


JM27 Specifications

Dimensions:
137X22mm
Frequency response:
30Hz-20KHz
Sensitivity:
10mV/Pa-40+/-2dB
(0dB= 1 V/Pa 1000Hz)
Polar pattern:
Cardioid Diversity> 12dB (300-3000Hz)
b Diversity> 15dB(1000Hz)
Impedance:
200 ohms
Equivalent noise level:
18dB (A Weighted)
Maximum SPL for 0.5% THD@1000Hz:
130db
Weight:
135g

Joe Meek ThreeQ Mono Compressor

threeQ
Just
 IN STOCK
threeq
Larger picture

The Joemeek threeQ is the perfect link between your music and your computer. It will bring out the best qualities or your music by giving it the "gloss" of a professional recording studio, at a fraction of the cost!

Built into a compact ½ rack chassis, we used the same Burr-Brown IC's for the Mic Pre that you'll find on our more expensive studio channels. We then added an extremely musical EQ section and an optical Compressor, for that signature "Meek" sound.

With inputs to accept everything between microphone and instrument levels, the threeQ sounds much larger than it's size!


threeQ Specifications

Input impedances:
Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain:
0dB to 60dB
Common mode rejection:
70dB
Equivalent input noise:
-128.5dBu (unweighted)
Distortion:
0.001% (below Compressor threshold)
Frequency response:
10Hz to 70kHz (-3dB)
Maximum input before clipping:
Mic: +19.5dBu; Line: +44.5dBu
Headroom before clipping:
+19.5dBu
Compressor threshold:
-6dBu to +20dBu (variable)
Compressor ratio:
5:1 (typical)
Compressor attack time:
1 msec to 100 msec (adaptive)
Compressor release time:
0.1 sec to 3 sec (adaptive)
Nominal output levels:
+4dBu/-10dBv
Output impedance:
75ohm
Output Level switch:
12dB attenuation
Noise Floor:
-85dBu (typical, with ~40dB mic gain)
VU Meter:
8 segment bargraph
Power supply:
12V ac mains adaptor
Power consumption:
12W
Mechanical:
220W x 44H x 180D (overall)
Weight:
1 kilo
EQ Boost and Cut:
+/-15dB (zero phase-shift bell response)
LF Frequency :
80Hz fixed
MID Frequency :
300Hz to 5kHz variable
HF Frequency :
12kHz fixed
 

JoeMeek MC2 Stereo Compressor

mc2
Just
 IN STOCK
mc2
Larger picture

The Mc2 is a professional studio-quality stereo compressor in a compact half-rack format. Simple to use yet extremely powerful, the Mc2 will bring out the best in any line-level stereo material and give the gloss of a professional studio to all your performances. It can be used for both recording/mastering, and live work.

Think of the Mc2 as three separate pieces of equipment:

  • A line level stereo preamplifier
  • A stereo Joemeek compressor
  • A stereo width processor.


threeQ Specifications

Input impedances:
Line: 20kohm
Pre-amp overall gain:
-6dB to 15dB
Common mode rejection:
70dB
Equivalent input noise:
-95dBu (unweighted)
Distortion:
0.001% (below Compressor threshold)
Frequency response:
10Hz to 70kHz (-3dB)
Maximum input before clipping:
+19.5dBu
Headroom before clipping:
+19.5dBu
Compressor threshold:
-6dBu to +22dBu (variable)
Compressor ratio:
1:1 to 10:1 (variable)
Compressor attack time:
1 msec to 100 msec (adaptive)
Compressor release time:
0.1 sec to 3 sec (adaptive)
Nominal output levels:
+4dBu/-10dBv
Output impedance:
75ohm
Output Level switch:
12dB attenuation
Noise Floor:
-95dBu (typical, with 0dB Input and Make Up gain)
VU Meter:
8 segment bargraph
Power supply:
12V ac mains adaptor
Power consumption:
12W
Mechanical:
220W x 44H x 180D (overall)
Weight:
1 kilo
GR Hold Threshold:
-10dBu to -50dBu (variable)
Stereo Width Range:
Mono/stereo/wide stereo (variable)
GR Meter/VC Meter:
8 Segment bargraph

JoeMeek sixQ Single Studio Channel

sixQ
Just
 IN STOCK
sixQ_sticker
Larger picture

The Joemeek sixQ packs a wealth of features into a single rack space studio channel.

A single channel mic pre, based on our high quality Burr-Brown IC, three bands of highly musical EQ, and our signature optical compressor make for a highly capable recording instrument. With a front panel instrument input

Output either analog or digitally directly to your sound card or DAW for a warm, musical analog sound - just what you've been looking for!


sixQ Specifications

Input impedances:
Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain:
10dB to 60dB (variable)
Common mode rejection:
70dB
Equivalent input noise:
-128.5dBu (unweighted)
Distortion:
0.001% (below Compressor threshold)
Frequency response:
15Hz to 70kHz (-3dB)
Maximum input before clipping:
Mic: +21dBu; Line: +45dBu
Headroom before clipping:
+21dBu
Compressor threshold:
∞dBu to -20dBu (variable)
Compressor ratio:
1:1 to 10:1 (variable)
Compressor attack time:
1 msec to 100 msec (adaptive)
Compressor release time:
0.1 sec to 3 sec (adaptive)
Nominal output levels:
+4dBu/-10dBv
Output impedance:
75ohm
Output Level switch:
12dB attenuation
Noise Floor:
-85dBu (typical, with ~40dB mic gain)
VU Meter:
Analogue movement
Power supply:
115V / 230V ac mains, 50/60Hz
Power consumption:
30W
Mechanical:
482W x 88H x 220D (overall)
Weight:
3 kilos
High Pass Filter:
12dB per octave cut below 80Hz
EQ Boost & Cut:
+/-15dB (zero phase-shift bell response)
LF Frequency :
40Hz to 650Hz variable
Mid Frequency :
300Hz to 5kHz variable
HMF Frequency :
1kHz to 6kHz variable
HF Frequency :
6kHz/12kHz switchable
EQ “Q”
0.9 (1.6 octaves

Digital Output Specifications

Sampling:
24 Bit
Sampling Rate:
44.1kHz, 48kHz, 88.2kHz or 96kHz selectable
Output Formats:
AES3 compliant (balanced), S/PDIF electrical, S/PDIF optical

 

JoeMeek oneQ Studio Channel

oneQ
Just
 IN STOCK
oneQ_sticker
Larger picture

The Joemeek oneQ is the most full-featured, technologically advanced studio channel we've ever made!

A single channel combining Mic Pre (with Burr-Brown IC), four band EQ, the most flexible of any Joemeek ever, our "signature" optical compressor, De-Esser, and Enhancer, it's a master channel like no other.

Housed in a 2u chassis, the elegantly sculpted faceplate is intelligently laid out, with clear, easy to read legends and a large analog VU meter. We even included 24bit, 96K A/D converters with word clock input and output.

The new oneQ raises the bar for all studio master channels!


oneQ Reviews

Mix Review Dec 2005

Resolution Feb 2006

oneQ Specifications

Input impedances:
Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain:
10dB to 60dB (variable)
Common mode rejection:
70dB
Equivalent input noise:
-128.5dBu (unweighted)
Distortion:
0.001% (below Compressor threshold)
Frequency response:
15Hz to 70kHz (-3dB)
Maximum input before clipping:
Mic: +21dBu; Line: +45dBu
Headroom before clipping:
+21dBu
Compressor threshold:
∞dBu to -20dBu (variable)
Compressor ratio:
1:1 to 10:1 (variable)
Compressor attack time:
1 msec to 100 msec (adaptive)
Compressor release time:
0.1 sec to 3 sec (adaptive)
Nominal output levels:
+4dBu/-10dBv
Output impedance:
100ohm
Output Level switch:
12dB attenuation
Noise Floor:
-85dBu (typical, with ~40dB mic gain)
VU Meter:
Analogue movement
Power supply:
115V / 230V ac mains, 50/60Hz
Power consumption:
30W
Mechanical:
482W x 88H x 220D (overall)
Weight:
3 kilos
High Pass Filter:
12dB per octave cut below 80Hz
EQ Boost & Cut:
+/-15dB (zero phase-shift bell response)
LF Frequency :
80Hz/120Hz switchable
LMF Frequency :
200Hz to 2kHz variable
HMF Frequency :
1kHz to 6kHz variable
HF Frequency :
7kHz/14kHz (selectable)
EQ “Q”
0.9 (1.6 octaves

Digital Output Specifications

Sampling:
24 Bit
Sampling Rate:
44.1kHz, 48kHz, 88.2kHz or 96kHz selectable
Output Formats:
AES3 compliant (balanced), S/PDIF electrical, S/PDIF optical
External Word Clock input:
75ohm, 1.25V - TTL level, 44.1kHz to 96kHz (auto synchronising)

 

JoeMeek twinQ Dual Studio Channel

twinQ
Just
 IN STOCK
twinq
Larger picture

The Joemeek twinQ is everything you ever wanted in a dual studio channel - and then some! We started with high quality Burr-Brown IC's for the preamp, added an extremely musical EQ section and an optical compressor for that signature "Meek" sound. Then we included some new and innovative features, like an "Iron" switch that switches the IC front end to a transformer - completely changing the topology of the circuit. It even has 24bit, 96k A/D converters built in.

All of this comes housed in a rugged 2u chassis with a beautifully sculpted aluminum faceplate. With sonic quality rivaling mic pre's priced thousands of dollars more, the twinQ sets a new standard for dual channels!


twinQ Specifications

Input impedances:
Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain:
0dB to 60dB
Common mode rejection:
70dB
Equivalent input noise:
-128.5dBu (unweighted)
Distortion:
0.001% (below Compressor threshold)
Frequency response:
10Hz to 70kHz (-3dB)
Maximum input before clipping:
Mic: +21dBu; Line: +45dBu
Headroom before clipping:
+21dBu
Compressor threshold:
∞dBu to -20dBu (variable)
Compressor ratio:
1:1 to 10:1 (variable)
Compressor attack time:
1 msec to 100 msec (adaptive)
Compressor release time:
0.1 sec to 3 sec (adaptive)
Nominal output levels:
+4dBu/-10dBv
Output impedance:
75ohm
Output Level switch:
12dB attenuation
Noise Floor:
-85dBu (typical, with ~40dB mic gain)
VU Meter:
Analogue movement
Power supply:
115V / 230V ac mains, 50/60Hz
Power consumption:
30W
Mechanical:
482W x 88H x 220D (overall)
Weight:
3 kilos
High Pass Filter:
12dB per octave cut below 80Hz
EQ Boost & Cut:
+/-15dB (zero phase-shift bell response)
LF Frequency :
40Hz to 650Hz variable
MID Frequency :
300Hz to 5kHz variable
HF Frequency :
6kHz/12kHz switchable

Digital Output Specifications

Sampling:
24 Bit
Sampling Rate:
44.1kHz, 48kHz, 88.2kHz or 96kHz selectable
Output Formats:
AES3 compliant (balanced), S/PDIF electrical, S/PDIF optical
External Word Clock input:
75ohm, 1.25V - TTL level, 44.1kHz to 96kHz (auto synchronising)

 

NOTE: JoeMeek Digital Interface

Digital Interface - The Joemeek Digital Audio Interface provides high quality digital audio outputs plus the ability to synchronize to an external word clock. The digital audio outputs are compatible with most digital recorders, as well as Digital Audio Workstations and mixers. S/PDIF format is available from the optical and RCA phono connectors, while the transformer coupled XLR connector provides an AES3 compatible output.

The Joemeek Digital Interface has highly stable onboard master clocks for low-jitter, hi-fi results. Internal sample rates of 44.1kHz, 48kHz, 88.2kHz or 96kHz are selected by means of rear panel switches. 44.1kHz is the standard used for audio CD's, while 48kHz and 96kHz are widely used in recording studios. In general, the higher the sample rate, the better the audio fidelity, but the more disk space is required for the recording. For example, recording at 96kHz requires twice as much storage as 48kHz. Consult the manual of your recorder or DAW as to what sample rates it will accommodate.

Alternatively the oneQ may be set to the frequency of an external master word clock, generated, for example, by the studio's recorder or DAW. When connected to the BNC socket provided, a suitable external word clock will be detected automatically and will override the twinQ's internal word clock.

The front panel LED labelled 'EXT CLK' illuminates when the oneQ is successfully locked to an external word clock. To avoid distortion, care should be taken not to overdrive the input to the Digital Interface. The red LED next to the Output Gain control is labeled "PEAK FSD" which stands for "Full Scale Digital". Occasional flashes are OK but if it is on all the time, turn something down!


SF